Filipino
Patented na produkto, patayo na may base plate.
Ang chuck ay isang built-in na silindro at madaling i-install, na walang karagdagang power source, at ang hangin ay pumapasok mula sa gilid upang makamit ang pag-clamping at paglabas. Maaaring mai-install ang maramihang mga chuck sa isang workspace nang sabay-sabay upang makamit ang multi-station machining, kaya upang mapabuti ang kahusayan sa produksyon.
Maaari naming ibigay ang mga pattern ng two-jaw, four-jaw, five-jaw, atbp.
| Spec | A | B | C | D | E | F | G | H | ako | J | K | L | M |
| KL04S-3 | 115 | 72 | 140 | 158 | 28 | 112 | 88 | 4 | 2-17 | - | - | - | 132 |
| KL05S-3 | 135 | 95 | 150 | 175 | 28 | 121 | 90 | 5 | 2-17 | - | - | - | 156 |
| KL06S-3 | 172 | 130 | 190 | 218 | 28 | 139 | 102 | 5 | 2-17 | 68 | 36 | 6-M8 | 192 |
| KL08S-3 | 210 | 165 | 222 | 265 | 35 | 148 | 110 | 5 | 2-17 | 68 | 36 | 6-M8 | 236 |
| KL10S-3 | 254 | 206 | 270 | 310 | 35 | 159 | 115 | 5 | 2-17 | 102 | 60 | 6-M8 | 280 |
| KL12S-3 | 320 | 206 | 340 | 400 | 45 | 186 | 134 | 5 | 2-20 | 125 | 60 | 6-M12 | 360 |
| Spec | Jaw stroke (diameter) |
Maximum na static clamping force KN (Kgf) |
Maximum na static holding force KN (Kgf) |
Pinahihintulutang presyon Mpa |
Saklaw ng clamping | Holding range | Timbang kg |
| KL04S-3 | 3.8 | 18(1850) | 18(1850) | 0.4-0.8 | 2-120 | 15-120 | 7.1 |
| KL05S-3 | 4.2 | 25(2580) | 25(2580) | 0.4-0.8 | 3-140 | 15-140 | 9.9 |
| KL06S-3 | 4.8 | 35(3600) | 35(3600) | 0.4-0.8 | 4-180 | 20-180 | 19.5 |
| KL08S-3 | 5.3 | 70(7130) | 70(7130) | 0.4-0.8 | 5-215 | 20-240 | 31 |
| KL10S-3 | 5.5 | 109(11200) | 109(11200) | 0.4-0.8 | 10-260 | 30-280 | 41 |
| KL12S-3 | 8.4 | 153(15700) | 156(16000) | 0.4-0.8 | 10-350 | 40-360 | 130 |
