Latine
Oleum rotundum hydraulicum cylindricum ultra tenue concavum est genus cylindrici hydraulicum quod maxime tenue et concavum in figura designatum est. Hoc genus cylindrici vulgo adhibetur in applicationibus ubi spatium limitatum est vel ubi consilium compactum desideratur.
Consilium ultra-tenue permittit ad minus altiore vestigium, id faciens specimen applicationum ubi spatium circumscribitur. Figura concava etiam pondus cylindri minuit, eo facilius tractandum et instituendum.
Olei cylindrici hydraulici gyratorii ordinantur ad circum axem suum gyrari, praebendo magis flexibilitatem in positione et motu. Inde eas aptas facit applicationes ut actuatores rotarii vel tabulae gyratorii indices.
Ultra-tenue, foramen magnum rotundum olei cylindrici hydraulici cum tota longitudine duarum tertiarum tantum primi generis.
Cum inaugurari, fige eam licet tergo obfirmatis.
| Spec. | A1 | B1 | C | C1 | D | D1 | E（h7） | E1 | F | F1 | F2 | G | G1 |
| TK1291N | 12 | 161.5 | 245 | 35 | 215 | 225 | 180 | 6-M6X1P | 130 | 12-M12X1.75P | 6-M12X1.75P | 115 | 163.5 |
| TK1512N | 12 | 173 | 305 | 35 | 275 | 275 | 230 | 6-M6X1P | 165 | 12-M12X1.75P | 6-M12X1.75P | 145 | 187 |
| TK18145N | 20 | 192.5 | 320 | 45 | 195 | - | 240 | 6-M6X1P | 190 | 12-M16X2P | - | 170 | 203 |
| Spec. | H | J | J1 | K | K1 | L1 | M | N | N1 | P | P1 | Q | Q1 | R1 |
| TK1291N | M100X2P | 91 | 113 | 39 | 52 | 15 | 96 | 121 | 134 | 151 | 4 | 154 | 4-M6X1P(PCDφ185) | 11 |
| TK1512N | M130X2P | 127.5 | 133 | 39 | 52 | 15 | 130 | 160 | 164 | 181 | 4 | 186 | 4-M6X1P(PCDφ225) | 13 |
| TK18145N | M155X2P | 145 | 155 | 50 | 52 | 20 | 150 | 180 | 195 | 213 | 4 | 245 | 4-M6X1P(PCDφ260) | 11.5 |
| Spec. | S | S1 | T | T1 | U | U1 | Vmax | Vmin | W1 | Wmin | Wmax | X1 | Z |
| TK1291N | 200 | PT1/2 | 170 | 8 | 219.5 | 251 | 25 | -5 | M104X2P | 25 | 55 | 100 | 5 |
| TK1512N | 230 | PT1/2 | 190 | 8 | 243 | 295 | 25 | -5 | M138X2P | 36.5 | 66.5 | 134 | 5 |
| TK18145N | 245 | PT1/2 | 230 | 8 | 266.5 | 318 | 30 | -5 | M155X2P | 25 | 60 | 151 | 9 |
| Spec/Model | Piston area cm2 |
Plaga mm |
Summa turnover numerus min-I (rpm) |
Maximum opus pressura MPa(kgf/cm2) |
GD2 kg.m2 |
Totalis voluminis olei INCILE lit./min |
pondus Kg * |
|
| Press parte | Hinc viverra | |||||||
| TK1291N | 227 | 219 | 30 | 3800 | 4.0(40) | 0.61 | 4.5 | 33.0 |
| TK1512N | 304 | 302 | 30 | 2800 | 3.5(35) | 0.8 | 7.0 | 50.0 |
| TK18145N | 360 | 370 | 35 | 1000 | 3.0(30) | 1.0 | 8.0 | 77 |
Praedicta notitia parametri normae sunt, personales solutiones nativus provideri potest secundum exigentiam emptoris.
