Latine
Chuck operetur applicando pressionem hydraulicam ad fauces, quae vicissim fibulae in workpiece. Hoc genus monax vulgo in machinis torno adhibetur, ubi cylindricas res ut virgas, tibias, vel spicula in machinis operationibus tuta permittit.
Pluma post-tensionis ad facultatem chuck applicandi ad fauces accessiones additas post clampationem initialem, strictam tenacitatem in workpiece obtinet. Haec factura adiuvat ne lapsus vel motus fabricae in machinis impediatur, ex accuratioribus et accuratioribus operationibus.
Maxilla post intentionem generis olei pressionis monax est versatile et certum instrumentum in variis industriis adhibitum ad firmandum cylindricum operandum in machinatione operationum.
| Specmm） | A | B | C（H6） | D | E | F | G | H | J | K Maximilianus. | K min. | L |
| KX160-2 | 165 | 85 | 140 | 104.8 | 5 | 4-M10 | 16 | M16×2P | 36 | 37 | 27 | 40 |
| KX200-2 | 210 | 95 | 170 | 133.4 | 5 | 6-M12 | 18 | M20×2.5P | 36 | 30 | 20 | 42 |
| KX250-2 | 254 | 110 | 220 | 171.4 | 5 | 6-M16 | 12 | M20×2.5P | 46 | 47 | 32 | 50 |
| Specmm） | M | N | O* | P. max. | P min. | Q | R max. | R min. | Z1 | Z2 | Z3 |
| KX160-2 | 30 | 35 | 22 | 55.2 | 52.5 | 70 | 48 | 38 | 35 | 20 | M6 |
| KX200-2 | 40 | 40 | 26 | 67.9 | 64.3 | 84 | 68 | 54.6 | 45 | 25 | M8 |
| KX250-2 | 46 | 50 | 32 | 85 | 79.6 | 100 | 65 | 50 | 55 | 30 | M8 |
| Spec | Plunger Stroke (mm) |
Maxilla Stroke (DIA.mm) |
Max.Speed (min-1) |
Max.Pull Force Kgf(KN) |
Max.Gripping Force Kgf(KN) |
Matching Cylindri |
Tenax dolor (mm) |
Max.Pressure Kgf/cm2(Mpa) |
pondus kg |
| KX160-2 | 10 | 5.0 | 3500 | 1360 (13.3) | 3045(29.8) | RH100 | 30~160 | 22(2.2) | 14 |
| KX200-2 | 10 | 7.2 | 3000 | 2500(24.5) | 4820(48.2) | RH125 | 40~210 | 25.5(2.5) | 26 |
| KX250-2 | 15 | 10.8 | 2500 | 3500(34) | 6118(60) | RH125 | 50~254 | 34(3.3) | 43 |
