Views: 269 Author: Site Editor Publish Time: 2025-01-20 Origin: Site
The chuck plays a very big role in the automatic machine tool, the flexible use of the chuck is the better operation of the equipment, so how do we make the operation of the chuck more flexible? The following Xiaobian will give you a few simple points.
1、in the use of electric chuck equipment, in order to ensure the accuracy of the equipment, then the need for smooth operation is very important, because incorrect or inappropriate smooth will lead to some problems, such as abnormal function at low pressure, clamping force weakened, clamping accuracy is poor, abnormal wear and jam, so it is necessary to correctly smooth the chuck.
2、 in the maintenance of equipment, it is necessary to pay attention to play molybdenum disulfide grease at least once a day, the oil into the chuck nozzle until the oil spills the claw face or the hole in the chuck, but if the chuck high rotation or a lot of water-based cutting oil in the processing of use, the need for more smooth, must be determined according to different conditions.
3、 clean it for cleaning, at least every 6 months to remove the chuck differentiation cleaning, adhere to the claw sliding surface clean and smooth, so that the chuck life increase.
However, if the cutting cast iron is cleaned at least once or repeatedly every 2 months, check whether the parts have cracks and wear, and replace the new products immediately. After the inspection, it is necessary to fill the oil to set up.
4、the use of cutting oil with anti-rust effect can prevent rust inside the chuck, because the chuck rust will reduce the clamping force, and can not clamp the workpiece.
5、 for different workpieces, it is necessary to use different clamping methods or select special fixtures. Three jaw chuck only a general use of a clamp, far-fetched use of it to clamp irregular or odd workpieces, will cause chuck damage!
If the chuck pressure is not normal, it will make the chuck under high pressure or the chuck will clamp the workpiece after the machine is shut down, which will reduce the chuck life.