Maori
| Tohu（mm） | A | B | C（H6） | F | G | H | K | L | M | N max. | N min. |
| KY06D-3 | 165 | 80 | 140 | 5 | 116 | 104.8 | 6-M10 | 14 | 20 | 45 | 31 |
| KY08D-3 | 215 | 92 | 170 | 5 | 150 | 133.4 | 6-M12 | 18 | 25 | 60 | 40 |
| KY10D-3 | 254 | 115 | 220 | 5 | 190 | 171.4 | 6-M16 | 20 | 30 | 74.5 | 49.5 |
| KY12D-3 | 304 | 122 | 220 | 6 | 190 | 171.4 | 6-M16 | 20 | 30 | 84.7 | 57.3 |
| Tohu（mm） | O max. | O min. | P max. | P min. | Q | R | S | T | U | V | W | X |
| KY06D-3 | 18 | 7.5 | 101.5 | 81.5 | 31 | 12 | 36 | 4 | M16×2.0P | 34 | 39 | 73 |
| KY08D-3 | 22.5 | 9 | 127 | 106 | 35 | 14 | 36 | 5 | M20×2.5P | 38 | 42 | 95 |
| KY10D-3 | 37.5 | 10.5 | 158 | 133 | 40 | 16 | 36 | 5 | M20×2.5P | 45 | 46 | 110 |
| KY12D-3 | 37.8 | 9.8 | 158 | 138 | 50 | 18 | 36 | 5 | M20×2.5P | 50 | 50 | 130 |
| Spec | Plunger Stroke mm |
Te whiu kauae (DIA.mm) |
Tere.Tere （min-1） |
Max.Pull Force KN（kgf） |
Max.Gripping Force KN（kgf） |
Porotaka Taurite | Awhe Mahinga (mm) | Te Peetanga Kgf/cm2(Mpa) |
Taumaha kg |
|
| Max | Min | |||||||||
| KY06D-3 | 20 | 28 | 5000 | 1730(17) | 2000(19.6) | RH100 | 165 | 19 | 27(2.6) | 13 |
| KY08D-3 | 25 | 40 | 4600 | 2440(22) | 2800(27.5) | RH125 | 210 | 23 | 25(2.5) | 25 |
| KY10D-3 | 30 | 50 | 4000 | 2850(28) | 3500(34.3) | RH125 | 254 | 24 | 29(2.8) | 37 |
| KY12D-3 | 30 | 54 | 2000 | 4180(41) | 4900(48) | RH150 | 304 | 30 | 29(2.8) | 59 |
