Slovenščina
| Spec (mm) | A | B | C（H6） | D | E | F | G | H | J | K Maks. | K Min. | L |
| KX160-3 | 165 | 85 | 140 | 104.8 | 5 | 6-M10 | 16 | M16×2P | 36 | 37 | 27 | 40 |
| KX200-3 | 210 | 95 | 170 | 133.4 | 5 | 6-M12 | 18 | M20×2,5P | 36 | 30 | 20 | 42 |
| KX250-3 | 254 | 110 | 220 | 171.4 | 5 | 6-M16 | 12 | M20×2,5P | 46 | 47 | 32 | 50 |
| Spec (mm) | M | N | O | P Maks. | P min. | Q | R Maks. | R min. | Z1 | Z2 | Z3 |
| KX160-3 | 30 | 35 | 22 | 55.2 | 52.5 | 70 | 48 | 38 | 35 | 20 | M6 |
| KX200-3 | 40 | 40 | 26 | 67.9 | 64.3 | 84 | 68 | 54.6 | 45 | 25 | M8 |
| KX250-3 | 46 | 50 | 32 | 85 | 79.6 | 100 | 65 | 50 | 55 | 30 | M8 |
| spec | Hod bata mm |
Hod čeljusti (DIA.mm) |
Največja hitrost (min-1) |
Največja vlečna sila Kgf (KN) |
Največja sila prijema Kgf (KN) |
Ustrezni cilinder |
Razpon prijemanja (mm) |
Max.Pressure Kgf/cm2(Mpa) |
Teža kg |
| KX160-3 | 10 | 5.0 | 3500 | 1360 (13,3) | 3045 (29,8) | RH100 | 30~160 | 22 (2,2) | 15 |
| KX200-3 | 10 | 7.2 | 3000 | 2500 (24,5) | 4820 (48,2) | RH125 | 40~210 | 25,5 (2,5) | 28 |
| KX250-3 | 15 | 10.8 | 2500 | 3500 (34) | 6118 (60) | RH125 | 50~254 | 34 (3,3) | 45.5 |
Zgornji podatki so standardni parametri, prilagojene rešitve po meri se lahko zagotovijo v skladu z zahtevami stranke.
